Excellence in Design and Manufacturing

Aetina R&D team is comprised of experts with over ten years of experience and knowledge regarding the GPU/VGA applications and industrial embedded system, enable us to design and provide the most appropriate boards and embedded platforms for customers’ requirements.

Incorporating the leading-edge technologies into our products, we insist on pursuing the quality and reliability. Throughout the design, development, testing and manufacturing process, and each stage is conducted by strict quality control guidelines and quality management system.


Manufacturing Capacity

Aetina’s most advanced in-house production line and manufacturing facilities, which is inside the Innodisk R&D and manufacturing center in Taiwan Yilan county. Along with state-of-the-art manufacturing equipment and over 12,000 square meters of factory space, this advanced manufacturing site provides a total anti-static production environment and enhanced industrial control solutions.

Starting from incoming material inspection and control, solder paste printing, pick-and-place, reflow, 100% AOI inspection to the flexible multi-platform selective soldering system, that all aim for the high-level product quality. The manufacturing facilities and equipment are also deployed with the latest technology and precise inspection capability, such as Solder Paste Inspection (SPI), 360-degree X-Ray inspection, high-speed and multi-level AOI inspection, are all conducted with strict manufacturing quality check and control.

Mounting solder paste printing Nitrogen Reflow X-RAY testing
 

Quality Gating Technique

SPI

SPI - Easier to Judge Pass or Fail

• World’s fastest inspection speed; up to 200 cm2/sec @ 15 µm
• Shadow-free fringe pattern lighting technology
• Optical resolution 10 µm or 15 µm

 

AOI

AOI - High Speed with Multi-phase Lighting

• 15 μm: 120 cm2/sec & 10 μm: 60 cm2/sec
• Advanced lighting system and color image recognition
• Technology for fine-pitch component comparison

 

Selective Soldering Machine

Selective Soldering Machine

• X, Y & Z Axis resolution : 0.1 mm
• Low maintenance Drop-Jet system, low solids (below 8%)
• Revolutionary patented 1.5mm micro nozzle

 

Quality Certification

Incorporating the leading-edge technologies into our products, we insist on pursuing the quality and reliability. Throughout the design, development, testing and manufacturing process, and each stage is conducted by strict quality control guidelines and quality management system.

ISO

Technical Support

Aetina focuses on long-term relationships and continuous services. We provide timely, experienced FAE services and technical support. With the online eRMA service system and service team, Aetina is able to offer efficient repair and replacement RMA experience to the clients.


We Are Green

RoHS

Aetina Corporation hereby certifies that our products are compliance with the European Union Directive 2011/65/EU on the Restriction of the use of certain Hazardous Substances in electronic equipment (RoHS).RoHS compliance means the product do not contain the following 10 chemicals in excess of established maximum concentration by weight:

RoHS Restricted Substances Allowable Limit
Cadmium and its compounds 100 ppm (0.01 weight %)
Mercury and its compounds 1000 ppm (0.1 weight %)
Hexavalent chromium and its compounds 1000 ppm (0.1 weight %)
Lead and its compounds 1000 ppm (0.1 weight %)
Polybrominated biphenyls (PBB) 1000 ppm (0.1 weight %)
Polybrominated diphenyl ethers (PBDE) 1000 ppm (0.1 weight %)
Bis (2-ethylhexyl) phthalate (DEHP) 1000 ppm (0.1 weight %)
Butyl benzyl phthalate (BBP) 1000 ppm (0.1 weight %)
Dibutyl phthalate (DBP) 1000 ppm (0.1 weight %)
Diisobutyl phthalate (DIBP) 1000 ppm (0.1 weight %)

REACH

The REACH Substances of Very High Concern (SVHC), as specified in the link according to the Candidate list published by ECHA (European Chemical Agency) : SVHC List
The data shown here may be updated due to different release dates. Aetina is fully acknowledged the labeling of the Substances of Very High Concern (SVHC) and aware of the importance of implementing the REACH Regulations for SVHC enclosed information and will continuously improving the rate of its compliance.


Customization Service

Aetina’s multiple product portfolios are suited to meet a variety of GPU Computing needs, as well as fulfill specialized requirement for Artificial Intelligence (AI) applications in automation, retail, medical, transportation, security, gaming system and smart city. By our well-talented R&D, advanced manufacturing and experienced services staffs, we got the capability to service you efficiently and easily customization program ranging from concept to mass production and till after services.

close

Top
ALERT TITLE
Ok